In the low temperature environment, the problem of poor sealing of gas generator cylinder has been puzzling the majority of users. Today, the generator set manufacturer is here to teach you how to deal with the air tightness of the cylinder gasket of the generator set.

　　發電機組冷啟動時，特別是在嚴寒的冬季，由于活塞環和缸壁油量少，密封效果差，反復啟動，發電機組將無法在火上運行。

　　When the generator set is cold started, especially in the cold winter, due to the small amount of oil in the piston ring and cylinder wall and the poor sealing effect, the generator set will not be able to operate on the fire due to repeated start-up.

　　有時，發電機組的氣缸磨損嚴重影響發電機組的密封性能，加大了發電機組的啟動難度。因此，發電機廠家建議將噴油器拆下，每個氣缸加30~40ml油，以提高氣缸的密封性能，增加壓縮時的壓力。

　　Sometimes, the cylinder wear of the generator set seriously affects the sealing performance of the generator set, which increases the starting difficulty of the generator set. Therefore, the generator manufacturer suggests to remove the fuel injector and add 30 ~ 40ml oil to each cylinder to improve the sealing performance of the cylinder and increase the pressure during compression.

　　瓦斯發電機組廠家介紹了之后，現在您應該知道如何處理低密封缸的問題。公司從事天然氣發電機組、沼氣發電機組的銷售、租賃和維護，并開展成套發電項目。

　　After the introduction of gas generator set manufacturer, now you should know how to deal with the problem of low seal cylinder. The company specializes in the sales, leasing and maintenance of natural gas generating units and biogas generating units, and carries out complete power generation projects.